Radio display trouble-Bendix King
Radio display trouble-Bendix King
I have the Bendix King 97 radio. Very similar to the Icom 200. When installed I only get one half background lighting up on the display. If I pull the radio and have my avionics person set it up on the bench I get full brightness. I have checked the pins responsible for the display and have the right power and ground at the pins. Any ideas??? Thanks Gary
I will start by saying I have absolutely no idea, but if I had to guess I would say there is a pin for auto-dimming that either has no voltage or the wrong voltage when installed in your panel. That, or maybe a photo cell that isn't getting any light when in your panel and therefore the radio thinks it is in complete darkness and auto dimming the display.
Don Sinclair
CYKF
RV-7A (Fuselage)
CYKF
RV-7A (Fuselage)
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM