DynonD100 to Garmin 327

A forum to discuss installation of avionics such as GPS, NAV & COMM radios, audio panels, auto pilots, etc.
Post Reply
User avatar
RVNewsletter
Class D
Posts: 259
Joined: Wed Mar 29, 2006 9:57 am
Location: St. Paul, MN.
Contact:

DynonD100 to Garmin 327

Post by RVNewsletter »

Does anyone have the EXACT configuration settings for allowing a D100's encoder to pass the pressure altitude for the Garmin 327 transponder. I'm using the harness that Stein built for me so I assume it's put together correctly but all I get is four dashes where the altitude should display. Nothing is connected to any GPS

Is there anything that needs to be set on the Dynon or does everything need to be set via the Garmin and if it's the latter, what settings should be used?
Bob Collins
Letters from Flyover Country
http://rvnewsletter.blogspot.com/

User avatar
Brantel
Class B
Posts: 1029
Joined: Wed Aug 30, 2006 3:23 pm
Location: Newport, TN

Post by Brantel »

Bob,

Set the Dynon to output format 4, set the 327 to recieve Icarus format at 9600 baud rate.
Brantel (Brian Chesteen),
RV12-IS, #121606, N912BC - Building Now!
RV10, #41942, N????? - Project Sold
RV-7/TU, #72823, N159SB - SOLD

Post Reply