How did you route the elevator electric trim wires?

[A2022]

I remember that I struggled with it, but ended with this... it's been fine so far. I used gold plated pins at the connector. since then I added a bead of RTV where the wire contacts the edge. there is no local connector at the trim actuator. the connector sits in a vibration free environment.

[A2022]

This above connector is my preferred choice—assuming one can have a favorite for trim. It's not subject to vibration, features a self-sealing design, and employs gold-plated pins for optimal connectivity. Flawless for 11 years. In this way you can be made one with the air molecules "floating and drifting and flying through the open sky".

The primary criterion for configuration should be reliability, followed by maintainability, to avoid constant repairs—although some may prefer to be always repairing their aircraft.

Foster The People - Lost In Space [Official Video]
https://youtu.be/8UsXq64gl58?si=zH8sH621mXeVHg4s