Step kit instructions and hardware list

A forum in which to discuss topics that are not specific to a particular series of aircraft (ie. how to cut alclad)
Post Reply
User avatar
Joe Parish
Class D
Posts: 311
Joined: Wed Apr 21, 2010 3:42 pm
Location: Sioux Falls SD

Step kit instructions and hardware list

Post by Joe Parish »

I have a lead on some steps for mine 9 which I failed to order with the fuse. He does not have the hardware or instructions. Wondering if someone out there has a copy they could send? Thanks

jparish@sio.midco.net
Joe
N525XC reserved
Empennage done
wings done
Fuse in progress
RV-9A

User avatar
Joe Parish
Class D
Posts: 311
Joined: Wed Apr 21, 2010 3:42 pm
Location: Sioux Falls SD

Post by Joe Parish »

He did find the parts list and instructions so I do not need them. Thanks Joe
Joe
N525XC reserved
Empennage done
wings done
Fuse in progress
RV-9A

User avatar
bruceh
Class D
Posts: 393
Joined: Sun Apr 06, 2008 11:11 pm
Location: Ramona, CA
Contact:

Post by bruceh »

Ignore the instructions from Van's on the layout and spacing of the rivet holes on the external plate. You will want to adapt the layout to line up with the underlying flanges and structure. Should look something like this.

Image
Bruce Hill
RV-9A N5771H flying over 1100 hours!
Build Log at http://www.overthehills.com/RV-9A-Project
Blog at https://flyingoverthehills.wordpress.com/
EAA Tech Counselor, A&P

User avatar
Joe Parish
Class D
Posts: 311
Joined: Wed Apr 21, 2010 3:42 pm
Location: Sioux Falls SD

Post by Joe Parish »

Cool! Thanks for the info Bruce. I have a ways to go to get to that point but will try to remember when the time comes.
Joe
N525XC reserved
Empennage done
wings done
Fuse in progress
RV-9A

Post Reply