the cart seems flexible enough that all wheels maintain ground contact.
Service cart for bench electric tools
Service cart for bench electric tools
I don't know if this is going to work but I thought I would experiment with one. need to work out a method to positively locate each tool so vibration doesn't move them around, and a wheel lock for the cart. needs a master power strip. at least they are off the floor. time will tell if it will work. cheap tools but they were good enough.
the cart seems flexible enough that all wheels maintain ground contact.
the cart seems flexible enough that all wheels maintain ground contact.
Steve Melton
N531EM, RV9A, Superior O-320, WW 200RV prop, Dual impulse slick mags, CHT 330F, EGT 1300F, Oil pressure = 65 psi, B and C Alt, 1100+ hours.
Freedom and Democracy are all that really matter.
https://www.rvplasticparts.com/
N531EM, RV9A, Superior O-320, WW 200RV prop, Dual impulse slick mags, CHT 330F, EGT 1300F, Oil pressure = 65 psi, B and C Alt, 1100+ hours.
Freedom and Democracy are all that really matter.
https://www.rvplasticparts.com/
Re: Service cart for bench electric tools
so far, this cart is working for me. I'm just doing knick-knack stuff these days. one plug powers everything.
Steve Melton
N531EM, RV9A, Superior O-320, WW 200RV prop, Dual impulse slick mags, CHT 330F, EGT 1300F, Oil pressure = 65 psi, B and C Alt, 1100+ hours.
Freedom and Democracy are all that really matter.
https://www.rvplasticparts.com/
N531EM, RV9A, Superior O-320, WW 200RV prop, Dual impulse slick mags, CHT 330F, EGT 1300F, Oil pressure = 65 psi, B and C Alt, 1100+ hours.
Freedom and Democracy are all that really matter.
https://www.rvplasticparts.com/