NEW GUY HERE! :)
- MexiFlyGuy
- Class G
- Posts: 9
- Joined: Thu Mar 25, 2010 8:49 pm
- Location: Cincinnati, Ohio
NEW GUY HERE! :)
Hello everybody,
I am new here to Rivetbangers (thanks Spike) and I thought I would introduce myself. I currently am only in the dreaming stage of building my RV, but the wife just gave me the go ahead... YAY. So as of right now I am just starting the process of collecting tools and setting up my workshop.
I currently am doing research on air compressors and the general consensus is to go with an oiled one. Do you guys have any input, or knowledge you wouldnt mind sharing? I dont want to get a HUGE one, because I am working with a 1 car garage, but I dont want to make the mistake of buying one that is too small to where it wont get the job done. any input would help, and if you guys know of any certain brand to go with (or stay away from) would help too...
Anyways, I am glad to be a part of what seems to be a great group.
I am new here to Rivetbangers (thanks Spike) and I thought I would introduce myself. I currently am only in the dreaming stage of building my RV, but the wife just gave me the go ahead... YAY. So as of right now I am just starting the process of collecting tools and setting up my workshop.
I currently am doing research on air compressors and the general consensus is to go with an oiled one. Do you guys have any input, or knowledge you wouldnt mind sharing? I dont want to get a HUGE one, because I am working with a 1 car garage, but I dont want to make the mistake of buying one that is too small to where it wont get the job done. any input would help, and if you guys know of any certain brand to go with (or stay away from) would help too...
Anyways, I am glad to be a part of what seems to be a great group.
Marshall
(Future RV-7A builder)
(Future RV-7A builder)
-
- Chief Rivet Banger
- Posts: 4013
- Joined: Thu Oct 14, 2004 8:40 pm
- Location: Baltimore, MD
- Contact:
I have been using an oil-less single stage from Home Depot for five years and it keeps chugging along. The oiled 2 stages are nice and quiet and usually have nice large tanks because of their capacity, but its not strictly required.
Welcome
Glad to have you aboard
Spike
Welcome
Glad to have you aboard
Spike
http://www.rivetbangers.com - Now integrating web and mail!
Current Build: 2 years into a beautiful little girl
Current Build: 2 years into a beautiful little girl
- Cherokee Driver
- Class E
- Posts: 144
- Joined: Sun Sep 18, 2005 10:43 am
- Location: Waukesha, Wisconsin
- Contact:
WELCOME Marshall!!!
Glad you stopped in. I think you will like it here; great folks that are willing to share knowledge in a friendly way. Hope you stick around.
If you want more info I am sure there have been some compressor postings here, but I'll weigh in any way.
Buy what you can afford is my advice. It will get used a lot so you should get what you want. Painting (priming and finish) will require larger capacity. Oiled rigs are quieter and I like my Ingersoll Rand Hobby Grade unit just for that reason. More about that off line here:
http://websites.expercraft.com/eseverson/?q=tools
There are a lot of guys that get by with minimal compressors so I wouldn't agonize over the choices (This is such good advice I wish I would follow it !!!)
Some builders become tool junkies and have to have the best of everything and that is OK (self rationalization here?).
The fact is though, that tools can become a real burden on the project if dollars are tight, so you don't need the best of everything. Again, tools that get used a lot (air compressor, rivet gun, etc,), are worth the extra money IMHO.
Good luck on feathering the nest. Keep us posted on the progress. I am looking forward to that obligatory photo of you with the emp kit box after delivery, on the front porch!!!
All the best.
CD
Glad you stopped in. I think you will like it here; great folks that are willing to share knowledge in a friendly way. Hope you stick around.
If you want more info I am sure there have been some compressor postings here, but I'll weigh in any way.
Buy what you can afford is my advice. It will get used a lot so you should get what you want. Painting (priming and finish) will require larger capacity. Oiled rigs are quieter and I like my Ingersoll Rand Hobby Grade unit just for that reason. More about that off line here:
http://websites.expercraft.com/eseverson/?q=tools
There are a lot of guys that get by with minimal compressors so I wouldn't agonize over the choices (This is such good advice I wish I would follow it !!!)
Some builders become tool junkies and have to have the best of everything and that is OK (self rationalization here?).
The fact is though, that tools can become a real burden on the project if dollars are tight, so you don't need the best of everything. Again, tools that get used a lot (air compressor, rivet gun, etc,), are worth the extra money IMHO.
Good luck on feathering the nest. Keep us posted on the progress. I am looking forward to that obligatory photo of you with the emp kit box after delivery, on the front porch!!!
All the best.
CD
RV-8A
Wing Kit (Slow Build...very slow build)
Home of "Skunk Works, Wisconsin Branch"
"Glacial Pace...but lovin every minute of it!"
Wing Kit (Slow Build...very slow build)
Home of "Skunk Works, Wisconsin Branch"
"Glacial Pace...but lovin every minute of it!"
-
- Class C
- Posts: 625
- Joined: Sat Nov 13, 2004 8:37 pm
- Location: Sartell MN
- MexiFlyGuy
- Class G
- Posts: 9
- Joined: Thu Mar 25, 2010 8:49 pm
- Location: Cincinnati, Ohio
Thanks for the help... So it seems like I am just really new and ansioux about the everything at this time... I think I may have been putting way too much thought into it! I think what I had in mind was just fine to start with. I think I am goint to settle on something about 10 to 20 lbs, blah blah blah. And I will be sure to send updates once my project gets a little more orginized to say the least. And I will def post a pic when my emp gets here, I havent ordered yet tho...
I am flying out to Oregon on the 16th of this month, an during my trip I am def stoping by Vans. Hopefully I can get a ride in one for the first time even though I will be there during Sun N Fun!
I am flying out to Oregon on the 16th of this month, an during my trip I am def stoping by Vans. Hopefully I can get a ride in one for the first time even though I will be there during Sun N Fun!
Marshall
(Future RV-7A builder)
(Future RV-7A builder)
- Lorin Dueck
- Class D
- Posts: 252
- Joined: Sun Dec 25, 2005 2:12 pm
- Location: San Jose, CA
- Contact:
Welcome to the group!!
I think you'll like it here.
I'm certaininly not an expert on air compressors - but here are few thoughts (others feel free to comment or disagree):
1. The most important thing to me was to avoid a small tank (must be larger than 5 gallons) - so the compressor would not keep cycling on and off.
2. If you are only going to use 1 tool at a time - 4-5 cfm at 90 psig capacity should be enough (this does not apply for painting)
3. If your shop is small (like mine) - consider a portable (i.e. wheeled) vertical tank.
4. If noise is a concern - go for the oiled rigs (like everyone else has said).
5. If you are thinking of painting your own project - make sure you get a compressor that will be compatible with your painting equipment (tank volume, air flow rate, oil separator, water filter, etc.).
I'm not going to paint my plane, I'm on a tight budget, I have a small shop, and did not want to annoy my neighbors with noise.... so I choose an inexpensive 4.4 cfm @90 psig, 21 gallon tank, single stage, oiled compressor from Harbor Frieght.
I've been building for 5 years and it's still going strong...
Lorin D
RV-9A - Standard Build
N194LD (Reserved)
I think you'll like it here.
I'm certaininly not an expert on air compressors - but here are few thoughts (others feel free to comment or disagree):
1. The most important thing to me was to avoid a small tank (must be larger than 5 gallons) - so the compressor would not keep cycling on and off.
2. If you are only going to use 1 tool at a time - 4-5 cfm at 90 psig capacity should be enough (this does not apply for painting)
3. If your shop is small (like mine) - consider a portable (i.e. wheeled) vertical tank.
4. If noise is a concern - go for the oiled rigs (like everyone else has said).
5. If you are thinking of painting your own project - make sure you get a compressor that will be compatible with your painting equipment (tank volume, air flow rate, oil separator, water filter, etc.).
I'm not going to paint my plane, I'm on a tight budget, I have a small shop, and did not want to annoy my neighbors with noise.... so I choose an inexpensive 4.4 cfm @90 psig, 21 gallon tank, single stage, oiled compressor from Harbor Frieght.
I've been building for 5 years and it's still going strong...
Lorin D
RV-9A - Standard Build
N194LD (Reserved)
Welcome to the group, Marshall If you find yourself in central Oregon on your trip, look me up! I'd be happy to show you some basically complete wings and a fuse kit still mostly in the crate.
I've been using a borrowed 20 gallon oil less compressor so far and it works fine, but I would definitely like something quieter at the very least. More volume would be second on the list.
I've been using a borrowed 20 gallon oil less compressor so far and it works fine, but I would definitely like something quieter at the very least. More volume would be second on the list.
Kelly
RV-7 Empennage done, wings done, fuselage to QB stage
1947 Stinson108-1 flying
RV-7 Empennage done, wings done, fuselage to QB stage
1947 Stinson108-1 flying
- MexiFlyGuy
- Class G
- Posts: 9
- Joined: Thu Mar 25, 2010 8:49 pm
- Location: Cincinnati, Ohio
Thanks everybody for the great info. I dont think I will be anywhere near central Oregon, im guessing you're around Bend area? I was born in Cottage Grove, but grew up in Eugene. I moved out to Cincinnati 7 years ago. This trip is going to be my wifes first time out to the west coast. So I have to take her to the Oregon coast, but for the most of our trip we will be in Eugene with family. I cant wait to tour Van's and hopfully get to take a ride. We shall see.
Marshall
(Future RV-7A builder)
(Future RV-7A builder)
Marshall,
First, welcome to rivetbangers! When you're in Oregon, allow me to also extend an invitation to stop by my place if you would like. I live about 25 minutes from Vans in the SE Portland area. I would be delighted to show you my project. My empennage and wings are finished, and my fuselage is nearly finished, too. It would be fun.
Bruce
First, welcome to rivetbangers! When you're in Oregon, allow me to also extend an invitation to stop by my place if you would like. I live about 25 minutes from Vans in the SE Portland area. I would be delighted to show you my project. My empennage and wings are finished, and my fuselage is nearly finished, too. It would be fun.
Bruce
- MexiFlyGuy
- Class G
- Posts: 9
- Joined: Thu Mar 25, 2010 8:49 pm
- Location: Cincinnati, Ohio