#10 screw dimple die that's pullable?

A place to discuss workshops and the use and desirability of tools.
Post Reply
tmbg
Class C
Posts: 613
Joined: Wed Feb 07, 2007 11:05 am
Location: Atlanta, GA (4A7)

#10 screw dimple die that's pullable?

Post by tmbg »

I realized that I failed to drill and dimple the screw holes in my aft skins that hold my rudder cable exit chafe tube adel clamps. Now that the structure is complete, I'm not sure how to go about doing that.

Is anyone aware of a die similar to a pop-rivet no access dimple die, but for a #10 screw?

Or, anyone have other suggestions on a reasonable way to dimple that?
Ian
RV-7 SB, chugging toward final assembly
IO-360-C1C 200hp obtained.
Hartzell BA prop received.
James Cowl ordered.
N773WW reserved!

tmbg
Class C
Posts: 613
Joined: Wed Feb 07, 2007 11:05 am
Location: Atlanta, GA (4A7)

Post by tmbg »

I guess I could have looked a little harder first:

http://www.averytools.com/prodinfo.asp?number=1027

disregard :)
Ian
RV-7 SB, chugging toward final assembly
IO-360-C1C 200hp obtained.
Hartzell BA prop received.
James Cowl ordered.
N773WW reserved!

Post Reply