Hello all, My first post in quite a while.
How would one determine which governor is best for your engine and propeller combo?
I'm a little perplexed on this one...
cheers,
Governors
-
- Chief Rivet Banger
- Posts: 4013
- Joined: Thu Oct 14, 2004 8:40 pm
- Location: Baltimore, MD
- Contact:
Great question. I have had it myself.
From what I can tell it seems to be more about matching your propeller than anything else. Most prop manufacturers or your re-seller will have recommendations.
John
From what I can tell it seems to be more about matching your propeller than anything else. Most prop manufacturers or your re-seller will have recommendations.
John
http://www.rivetbangers.com - Now integrating web and mail!
Current Build: 2 years into a beautiful little girl
Current Build: 2 years into a beautiful little girl
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
I managed the group buy on the PCU 5000 guvs on VAF before Doug banished the opportunity of builders doing things for builders and demanded a "cut" whenever a group buy happens... so that is why they don't happen anymore.
Anyways, in the process I learned a bit about who makes what govs and what not.
From what I discovered, there are the old Woodward ones that nobody uses anymore.
There are also the MT's which have been plagued with "surging" issues.
This lead me to looking at the Czech-made one called Jihostroj. See http://www.jihostroj.com/ for more 411. ANYWHOOOO... they sell it in the US under the PCU 5000 moniker and I sold about 150 of them with Bob Honig from American Engines in California. If you would like one, see him and tell him I sent you.
The PCU 500 has been used in MANY RV's and has a rep for being bulletproof and just simply the BEST! That is why I chose it. See http://www.pcu5000.com/ for more info on that.
It is a damn shame that I can't do the group buys anymore. They really worked well for the builders.
Oh well, look into the PCU 5000 and talk to Bob. I have his contact info if you can't find him.
CJ
Anyways, in the process I learned a bit about who makes what govs and what not.
From what I discovered, there are the old Woodward ones that nobody uses anymore.
There are also the MT's which have been plagued with "surging" issues.
This lead me to looking at the Czech-made one called Jihostroj. See http://www.jihostroj.com/ for more 411. ANYWHOOOO... they sell it in the US under the PCU 5000 moniker and I sold about 150 of them with Bob Honig from American Engines in California. If you would like one, see him and tell him I sent you.
The PCU 500 has been used in MANY RV's and has a rep for being bulletproof and just simply the BEST! That is why I chose it. See http://www.pcu5000.com/ for more info on that.
It is a damn shame that I can't do the group buys anymore. They really worked well for the builders.
Oh well, look into the PCU 5000 and talk to Bob. I have his contact info if you can't find him.
CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
Oh!
Here is a link:
http://www.vansairforce.com/community/s ... hp?t=66948
...to the most recent MT "surging" thread on the other site.
CJ
Here is a link:
http://www.vansairforce.com/community/s ... hp?t=66948
...to the most recent MT "surging" thread on the other site.
CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!