remote exhaust ball joint oiler

[A2022]

I am removing the cowl less these days. oil change time interval increasing to 100 hrs. no chance to keep the exhaust ball joints lubricated. so, I thought a remote oiler could be beneficial. I like the exhaust exit to wiggle a lot and be totally free when moved by the little finger. shined the exhaust pipes. as you can tell, I like this exhaust system.

lubrication method seems to work but will it last? I'll try one side to get a feel for it.

SS tube OD = .061 inch

52 hr cold oil going to 100 hrs.



********

[A2022]

I gave it 2CC and then blew out the line with the syringe. it took about 2 minutes total. only the right-hand side.

are your nuts tight and Balls lubed?

[A2022]

at 20 hrs, it looks OK. not needed on a 9 but I wanted to see if it could be done. it still pumps the lube to the joint. I'll leave it installed for a while.

note the exhaust ball joint flange bolts with nuts with cotter key, not self-locking nuts. it's important.

[A2022]

post duplicate, I don't know how to delete it so I erased it.

[A2022]

a little mouse milk goes a long way on the exhaust ball joints. it's all those secret mouse ingredients. the doctor is in the house.

Our House
https://youtu.be/KwIe_sjKeAY?si=w_1QVMS712CLlXej

[A2022]

well, after 1.5 years, this is still working perfectly.

Nora En Pure - Norma Jean (Original Mix)
https://youtu.be/wyu69YFRecU?si=N3dZVNuxfYXiete3