this question may have been missed in the other thread about wing jigs, so i thought i'd start a new one.
how wide is the spar on the -7? i am getting my stands all set up and installed today, and i need to know how long to cut the angle it will rest on.
thanks!
wing spar width
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
Chad, looks like you already cut the angles.
They are 7 7/8" inches wide, overall.
You will need additional angle on the tip side, about 5" long for attachement to the outside rib. Get 8 #10 nuts, washers and bolts to fasten the stuff together.
CJ
They are 7 7/8" inches wide, overall.
You will need additional angle on the tip side, about 5" long for attachement to the outside rib. Get 8 #10 nuts, washers and bolts to fasten the stuff together.
CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!