F-824B

briand · Post by **briand** » Tue Apr 08, 2008 9:41 am

Anyone know why these need to be installed with K1000-06 and truss head screws instead of c-sunk K1100-06 and AN507-6R6?

Speed3Guy · Post by **Speed3Guy** » Tue Apr 08, 2008 10:35 am

What is F-824B?

briand · Post by **briand** » Tue Apr 08, 2008 11:06 am

The little inspection cover plates that go under the emp. and screw onto the two F-824PP side skins.

Speed3Guy · Post by **Speed3Guy** » Tue Apr 08, 2008 5:20 pm

Well, my prepunched fuse calls out K1100-06 nutplates and AN507-6r6 screws there.

I can't imagine using truss heads there, someone must have been hitting the pipe before coming to work to draw those plans on yours.

Cheers,
Guy

briand · Post by **briand** » Wed Apr 09, 2008 12:15 am

It's a bad pic. but you can still make out the P/N's.

I'll have some of what they're smokin.

Dan A · Post by **Dan A** » Fri Apr 11, 2008 10:08 pm

I don't see a problem with using the k1100-6 and AN507-6R6's. I used the counter sunk screws and they work great.
Dan