IO-360 Baffle Kit Instructions

RobDob · Post by **RobDob** » Fri Jun 22, 2012 5:33 am

Hi all

Does anyone have a copy of the instructions for the IO-360 Baffle Kit they could scan & e-mail me please? Part number for the kit is BAF-8-IO360. No instructions came with the kit and Vans keep giving me instructions which state 'O-360 ONLY' on them!! My engine is angle valve in case that is of any relevance.

Any help gratefully received!!!

Cheers

Rob

robdobney(@)hotmail.com

RobDob · Post by **RobDob** » Sat Jun 23, 2012 12:07 am

Having spoken to Dale at Vans, it seems this is as close as the instructions get!!!!

Post by **bullojm1** » Sat Jun 23, 2012 8:49 am

Rob,

There is very little difference between the cylinders for the IO-360 and O-360. The biggest difference I can think of is you will need to put a hole in the back of the baffle for fuel line going to the spider. If you have a CS prop, you will also need to provision for the oil line in the front right baffle.

The baffles take a little patience. The golden rule I heard is you don't want any more than the area of the face of a Quarter in leaks between your baffles and your engine.

Good Luck!

RobDob · Post by **RobDob** » Sun Jun 24, 2012 2:47 am

Thanks Mike; will give it a go!