Lycoming 360 model

A forum to discuss the installation and maintenance of the O-320, O-360, & O-540 engines and their variants.
Post Reply
User avatar
A2022
Class D
Posts: 440
Joined: Sat Mar 05, 2022 8:52 am
Location: Cincinnati, OH
Contact:
Contact A2022

Lycoming 360 model

Post by A2022 »

a nice model. I see the prop gov oil hose is only clamped to the sump in one place. I used two p-clamps, but my hose is slightly long but has been fine for 1000+ hrs. this model would be good for taking some measurements if I wanted to reduce the length. Computed Mass of this model = 308.0 pounds but is missing some internals. need to find a way to activate them.


Image

Image

Image

Image


Image

Image

Image

Image
Steve Melton
RV9A, Superior O-320 (roller cams), WW 200RV prop, Dual impulse slick mags, CHT 330F, EGT 1300F, Oil pressure = 65 psi, B and C Alt, 1000+ hours
Freedom and Democracy are all that really matter.
https://www.rvplasticparts.com/
Top
Post Reply

Return to “O-320 / O-360 / O-540”