FAB to carb screws

A forum to discuss the installation and maintenance of the O-320, O-360, & O-540 engines and their variants.
Post Reply
User avatar
cjensen
Whiskey Victor
Posts: 5275
Joined: Sat Apr 23, 2005 10:36 pm
Location: Green Bay, WI

FAB to carb screws

Post by cjensen »

Since I don't have the Van's FAB, I don't have a set of instructions or plans to guide me on this. What screws are used to connect the air box to the bottom of the carb? AN3 is too small...AN4 is too big and it looks like course threads...??? :?
Chad Jensen
Missing my RV-7...
Vertical Power support
920.216.3699
http://verticalpower.com

User avatar
bullojm1
Chief Rivet Banger
Posts: 1357
Joined: Sat Mar 25, 2006 6:37 pm
Location: KDMW
Contact:

Post by bullojm1 »

Chad-

It's a "BOLT HEX 1/4-20X1/2" on Van's store. Drilled head. If you want a scanned set of the FAB instructions, let me know.

- Mike B
Mike Bullock
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!

User avatar
cjensen
Whiskey Victor
Posts: 5275
Joined: Sat Apr 23, 2005 10:36 pm
Location: Green Bay, WI

Post by cjensen »

I shoulda just called you...I knew you'd be the first to answer!

Yes...I would like a copy just to have...thx!! 8)
Chad Jensen
Missing my RV-7...
Vertical Power support
920.216.3699
http://verticalpower.com

User avatar
bullojm1
Chief Rivet Banger
Posts: 1357
Joined: Sat Mar 25, 2006 6:37 pm
Location: KDMW
Contact:

Post by bullojm1 »

OK, FAB instructions post at:

http://rvplane.com/pdf/Filtered_Air_Box.pdf
Mike Bullock
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!

User avatar
cjensen
Whiskey Victor
Posts: 5275
Joined: Sat Apr 23, 2005 10:36 pm
Location: Green Bay, WI

Post by cjensen »

Sweet! Thanks man! 8)
Chad Jensen
Missing my RV-7...
Vertical Power support
920.216.3699
http://verticalpower.com

Post Reply