Intake gaskets leak
Intake gaskets leak
All four intake gaskets were leaking on 250 h Lycoming so I ordered new ones and replaced them.
Several people warned me in private against using the sealant and it looks like they have good reasons to. However I've read somewhere that this type of sealant is widely used for exactly the same application.
I know for sure that there is a bunch of knowledgeable folks here on RB what would you say? Disassemble again and scrape it off before engine start?
Several people warned me in private against using the sealant and it looks like they have good reasons to. However I've read somewhere that this type of sealant is widely used for exactly the same application.
I know for sure that there is a bunch of knowledgeable folks here on RB what would you say? Disassemble again and scrape it off before engine start?
RV-9A N666BK flying 4,500+ hours since 2011
-
- Chief Rivet Banger
- Posts: 4013
- Joined: Thu Oct 14, 2004 8:40 pm
- Location: Baltimore, MD
- Contact:
Yup!
Spike
Spike
http://www.rivetbangers.com - Now integrating web and mail!
Current Build: 2 years into a beautiful little girl
Current Build: 2 years into a beautiful little girl
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
Vlad,
I sent a link of this thread to our local A&P IA, Speedpants (who works for alcohol) so that he could comment. Hopefully he could lend some insight on this subject regarding methods and materials.
Obviously it shall be cleaned up but regarding whether it needs to be sealed with a product or not, I don't know. Also, if it does require a sealant, what type?
Perhaps either Speedpants or Mahlon could reply?
CJ
I sent a link of this thread to our local A&P IA, Speedpants (who works for alcohol) so that he could comment. Hopefully he could lend some insight on this subject regarding methods and materials.
Obviously it shall be cleaned up but regarding whether it needs to be sealed with a product or not, I don't know. Also, if it does require a sealant, what type?
Perhaps either Speedpants or Mahlon could reply?
CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
-
- Class G
- Posts: 16
- Joined: Wed Dec 29, 2010 9:39 pm
- Location: KPYM
- Contact:
Vlad, the use of sealant on any intake part is not needed, and yes there is a threat of possible ingestion, the gaskets will do a fine job on their own with many hundreds of hours of worry free operation, I would recoment removing the sealant and installing new gaskets. Hope this helps....and john I also work for money too!
The best aircraft mechanic is one you only see once a year
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
captain_john wrote:You are a mad man Vlad!!!
Come to KPYM again!
We plan on being here all weekend.
CJ
What to do in there? I already know everybody been everywhere ate all MA food saw everything (seals too) Only Jane's Cafei I missed because it's next to Hangar #5
RV-9A N666BK flying 4,500+ hours since 2011
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
Ya Chadley!
...It IS!!!
I have seen more and MORE experimentals than EVER!!!
The radio is ON FIRE with Experimental XYZ, Experimental 123...
Really cool!
...that's something for conservative New England!
CJ
...It IS!!!
I have seen more and MORE experimentals than EVER!!!
The radio is ON FIRE with Experimental XYZ, Experimental 123...
Really cool!
...that's something for conservative New England!
CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!