Hey, does anyone have any desiccant plugs that they aren't using anymore?
Yah, I know... I am cheap and shameless.
I know that if I had a set and wasn't using them anymore, I would offer them to another builder who needs them.
Sooooo, cough them up if you are done with them.
I will buy you a beer (or several) at OSH!
(of course, if you know me I would do that anyways)
CJ
...looking to mooch
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
...looking to mooch
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
CJ:
I happen to have a set of what you desire. I'll have to scrounge them up at the hangar tomorrow. Shoot me an address to send them to.
You owe me big time, fella!
I happen to have a set of what you desire. I'll have to scrounge them up at the hangar tomorrow. Shoot me an address to send them to.
You owe me big time, fella!
Jeff Orear
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
I'll hold off sending my set to you CJ until you check that out. They are all ready to go if you need them. Just let me knowBill H wrote:John! there is a set of plugs in hanger 5 . 4 th draw down . You can have them.
Jeff Orear
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
Ha!
OMG! They are in my hangar and I didn't even know it! ha!
Thanks guys!!!
Billy, I will check that out next time I am up there.
Jeff, thanks anyways. If Billy says they are there... they are there!
What a great bunch of guys, these RV'ers!
CJ
OMG! They are in my hangar and I didn't even know it! ha!
Thanks guys!!!
Billy, I will check that out next time I am up there.
Jeff, thanks anyways. If Billy says they are there... they are there!
What a great bunch of guys, these RV'ers!
CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!