I spent Sunday working on my shop, doing more drywall. Here's a shot of the 1/2 in two and half car garage that'll used for aircraft manufacturing.
Where the saw horses are, there will be a 4x8 foot table. The florescent light will be hung above, and the table against the wall will be the back rivet/dimpling table. The table saw will be moved when the big work table goes in.
Here's another shot of the back of the shop.
The area under the bikes will be the grinder and prep/polishing area with benches against the wall.
Thought I'd share how my space is coming together. I still have two more walls to finish drywalling and trim work to do. No mudding or paint gonna happen here. It will be heated and have cable TV!
The shop is comin' along...
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
Looks GREAT! Doesn't even resemble the other pics!!!
If there is a party wall between a living space and the garage, it will need to be rocked with 5/8" AND MUDDED!
It needs a 3 hr. burn through rating. If there ever was a problem, the insurance company would have a leg to stand on.
The beer fidge is a NECESSITY!!!
CJ
If there is a party wall between a living space and the garage, it will need to be rocked with 5/8" AND MUDDED!
It needs a 3 hr. burn through rating. If there ever was a problem, the insurance company would have a leg to stand on.
The beer fidge is a NECESSITY!!!
CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Here's my finished work area in the shop-
And here's an outside-lookin-in shot of the shop all finished-except the mud on the living space wall. That's gonna be done soon, and that's IT!
I'm done inventory-ing the tail kit, and now have to wait a few days to get started on anything. Life takes over for a few days with family birthdays to celebrate.
Just kidding. I'll be started soon!
And here's an outside-lookin-in shot of the shop all finished-except the mud on the living space wall. That's gonna be done soon, and that's IT!
I'm done inventory-ing the tail kit, and now have to wait a few days to get started on anything. Life takes over for a few days with family birthdays to celebrate.
Just kidding. I'll be started soon!
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
-
- Chief Rivet Banger
- Posts: 4013
- Joined: Thu Oct 14, 2004 8:40 pm
- Location: Baltimore, MD
- Contact:
The shop is comin' along...
Thats what you think until she found out how much you are going to spend on an engine. Then she will start questioning lots of things
Submitted via email
My wife's "this-is-what-I'm-driving-until-kids-come-along" car.