Spike, the next think you will need it for is the forward spar. The part where you need to cut it longitudinally is very difficult to do with snips without bending it. The bandsaw is the method I used.
CJEmpennage on order
-
captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
The bandsaw is an extremely handy tool!
Spike, the next think you will need it for is the forward spar. The part where you need to cut it longitudinally is very difficult to do with snips without bending it. The bandsaw is the method I used.
CJ
Spike, the next think you will need it for is the forward spar. The part where you need to cut it longitudinally is very difficult to do with snips without bending it. The bandsaw is the method I used.
CJRV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
-
spikescopilot
- Chief Rivet Banger
- Posts: 325
- Joined: Thu Oct 14, 2004 8:45 pm
- Location: KFDK
- Contact:
Got to congratulate you honey, it's Saturday evening and everything has just now come out of the boxes.spike wrote:
I think I can make it to at least Friday though.
-- John
*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
Spike's Co-pilot
http://www.nothingnoteworthy.com (Just another blog)
Spike's Co-pilot
http://www.nothingnoteworthy.com (Just another blog)
-
Spike
- Chief Rivet Banger
- Posts: 4013
- Joined: Thu Oct 14, 2004 8:40 pm
- Location: Baltimore, MD
- Contact:
http://www.rivetbangers.com - Now integrating web and mail!
Current Build: 2 years into a beautiful little girl
Current Build: 2 years into a beautiful little girl